Summary of Contents for Vulcan-Hart VBP13 ML-126355
Page 1
VBP77 ML-126354 VBP77 I ML-126361 VBP8H I ML-126362 VBP12H I ML-126363 VBP15H I ML-126364 In U.S.A.: VULCAN-HART COMPANY P.O. BOX 696 LOUISVILLE, KY 40201-0696 TEL.: 502-778-2791 F31081B (399) INSTALLATION & OPERATION MANUAL VBP7I In Canada: HOBART FOOD EQUIPMENT GROUP CANADA...
FOOD HOLDING AND TRANSPORT CABINETS PLEASE KEEP THIS MANUAL FOR FUTURE USE Vulcan-Hart Holding and Transport Cabinets are produced with quality workmanship and material. Proper installation, usage, and maintenance of your cabinet will result in many years of satisfactory performance.
Before installing, verify that the electrical service agrees with the specifications on the rating plate located on the lower left corner. If the supply and equipment requirements do not agree, do not proceed with the installation. Contact your dealer or Hobart Food Equipment Group Canada immediately. UNPACKING This cabinet was inspected before leaving the factory.
INSTALLATION CODES AND STANDARDS The cabinet must be installed in accordance with: In the United States of America: 1. State and local codes. 2. National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. In Canada: 1.
WARNING: THE CABINET AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING OR SERVICING THE CABINET. CONTROLS THERMOMETER All Models (Fig.1) POWER INDICATOR LIGHT HEAT INDICATOR LIGHT FULL RANGE THERMOSTAT THERMOMETER Models VBP8HI, VBP12HI, VBP15HI Only (Not Shown) ON/OFF SWITCH BEFORE FIRST USE WARNING: UNPLUG ELECTRICAL POWER SUPPLY BEFORE CLEANING.
OPERATING CABINET 1. Connect electric power supply. • Power indicator light is lit. 2. If cabinet is a VBP8HI, VBP12HI, or VBP15HI, press ON/OFF switch ON. • Interior air circulating fans start. • Control/component compartment cooling fans start. 3. Turn thermostat knob to desired setting. •...
Shutdown If cabinet is a VBP8HI, VBP12HI, or VBP15HI, press ON/OFF switch OFF. Extended Shutdown Unplug electrical power supply. Power indicator light will go off. CLEANING WARNING: UNPLUG ELECTRICAL POWER SUPPLY BEFORE CLEANING. Clean cabinet interior with a mild soap and water whenever food spill occurs. Never use harsh chemicals or abrasive pads to clean cabinet.