Yamaha PSR-E373 Owner's Manual page 36

Using the Song Lesson Feature
6
Confirm the evaluation in the current
Step.
When the current Step reaches the end, your per-
formance will be evaluated and your score (from
0–100) is shown in the display.
Excellen
068
Displayed when you've
passed the Step.
A score between "0"–"59" indicates that you did
not pass this Step and you should try the same
Step again, which begins automatically. A score
of "60"–"100" indicates that you passed this Step
and you should try the next Step, which begins
automatically.
NOTE
• If the specified part is both hands, you cannot pass the
Step until you play both hands, even if you play one of the
hands well. Only a message such as "Left Part is cor-
rect!" appears in the display.
7
Execute Step 02, 03, 04, and so on.
In the last Step of each Song, you will practice all
the way through the Song. When you pass all
Steps, the Keys to Success mode will automati-
cally be turned off and playback stops.
NOTE
• Even during lesson, you can select another Step by using
the [+/YES]/[-/NO] buttons.
8
To stop this Lesson, press the [KEYS TO
SUCCESS] button.
36
PSR-E373, PSR-EW310, YPT-370 Owner's Manual
Confirming the Passing Status
You can confirm the passing status of each Song
simply by selecting a Song and each Step.
When Step is selected
Step01
001
★
: Passed
No information: Not yet passed
When Song is selected
Elise 1
004
001
★✩✩
: There are one or more Steps not yet
passed in addition to the last Step
★✩★
: Only last Step passed
★★✩
: All Steps passed other than last Step
★★★
: All Steps passed
Clearing the Passing Status
You can clear existing passing status entries for the
entire Song or a specific Step of the Song.
To clear the passing status entries of all Steps:
Select the desired Song then hold down the [KEYS
TO SUCCESS] button for longer than three seconds,
with the Keys to Success mode disabled. A "Cleared"
message will appear on the display.
To clear the passing status entry for a specific
Step:
Select the desired Song, enable Keys to Success,
select the desired Step, then hold down the [KEYS
TO SUCCESS] button for longer than three seconds.
A "Cleared" message will appear on the display.
NOTE
• This operation cannot be executed during playback.