Radio Basic Operation - Kenwood DNX8160DABS Quick Start Manual

Radio/ Digital Radio

Radio Basic Operation

1) Press the <HOME> button.
2) Touch [ ].
3) Touch [Radio].
1
2
3
4
1 Switches the seek mode in the following sequence;
[AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception
automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
2 Displays the information of the current station.
Touching [ ] allows you to switch between Content
A and Content B.
3 FM AM : Switches the band.
4 E F : Tunes in a station. The method of frequency
switching can be changed.
5 Recalls the memorized station. When touched for 2
seconds, stores the current receiving station in memory.
Ñ Function panel
1) Touch on the left side of the screen.
5
TI * Sets the traffic information mode on.
1
SETUP Touch to display the Radio SETUP screen.
AME Presets stations automatically.
PTY * Searches a program by setting program type.
1
MONO * Select the Monaural reception.
1
LO.S * Turns the Local Seek function on or off.
1
• *1 FM Tuner only
Ñ Auto memory
1) Touch [AM] or [FM] to select the band.
2) Touch on the left side of the screen to display the
function panel.
3) Touch [AME].
4) Touch [Yes].
Auto memory starts.
Ñ Recalling the preset station
1) Touch [FM#] (#:1-15) or [AM#] (#:1-5).
Ñ Search by program type
1) Touch [PTY] on the function panel.
2) Select a program type from the list.
3) Touch [Search].
NOTE
• For other operations, see Radio Basic Operation (P.48) in
the Instruction Manual.
English | 19