VTech CS6429-2 User Manual page 52

Appendix
Handset display screen messages
NUMBER ALREADY SAVED
NEW VOICEMAIL
NO BATTERY
NO LINE
NO MESSAGE
NO SIGNAL,
CALL ENDED
NOT AVAILABLE
AT THIS TIME
OUT OF RANGE OR
NO PWR AT BASE
**PAGING**
PHONE
PLACE IN CHARGER
REC MEM FULL
REC MEM LOW
RINGER MUTED
SAVED
SPEAKER
UNABLE TO CALL.
TRY AGAIN
XX MISSED CALLS
XX NEW MESSAGES
The telephone number you have entered is already stored
in the directory.
There are new voicemail messages from your telephone
service provider.
You place the handset in the telephone base or charger
without installing a battery in that handset.
There is no telephone line connected.
There are no messages in the answering system.
Communication between the handset and the telephone
base is lost during a call.
Someone else is already using the directory, speed dial list,
call log or answering system.
The handset has lost communication with the
telephone base.
The telephone base is paging all handsets.
The handset is on a call.
The battery is very low. The handset should be placed in
the telephone base or charger for charging.
The answering system memory is full.
The answering system has less than three minutes of
recording time left.
The ringer is muted temporarily during an incoming call.
The entry has been saved in the directory.
The handset speakerphone is in use.
Failed intercom or two handsets are already on a call.
There are XX new calls in the caller ID history.
There are XX new messages in the answering system.
48