Message Alert Tone; Recording Time - VTech CS6429-2 User Manual

Answering system settings

Message alert tone

When the message alert tone is turned on and you have new message(s), the
telephone base beeps every 10 seconds. Unless you change it, the message
alert tone is set to off.
Press MENU/
1.
2. Press or
3. Press or
4. Press or
5. Press or
selection. You hear a confirmation tone.
• • The answering system must be turned on for the message alert tone The answering system must be turned on for the message alert tone
to function. to function.
• • Press any key on the telephone base (except /FIND HANDSET) to Press any key on the telephone base (except /FIND HANDSET) to
temporarily silence the message alert tone. temporarily silence the message alert tone.

Recording time

You can set the recording time for each incoming message.
Press MENU/
1.
2. Press or
3. Press or
4. Press or
5. Press or
/SELECT to save. You hear a confirmation tone.
press
MENU
when the handset is not in use.
SELECT
to select >ANSWERING SYS, then press
to select >ANS SYS SETUP, then press
to select >MSG ALERT TONE, then press
to choose ON or OFF, then press
when the handset is not in use.
SELECT
to select >ANSWERING SYS, then press
to select >ANS SYS SETUP, then press
to select >RECORDING TIME, then press
to choose from 3 MINUTES, 2 MINUTES or 1 MINUTE, then
MENU
38
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
/SELECT to save your
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU