Extension cables & class 1 product
If an extension lead is required a 3 core cable must be used
as your appliance is earthed and of class 1 construction.
Up to 30m (100ft) can be used without loss of power.
Power plugs must match the outlet. Never modify the
plug in anyway. Do not use any adapter plugs with
earthed (Class 1) appliances. Unmodified plugs and
matching outlets will reduce the risk of electric shock.
1. Temperature indicator
2. Power indicator
Before first use
Remove all packaging from the appliance.
Clean the appliance before first use.
Warning! Always place the appliance on a flat, clean and
non-slip surface before operating it.
Warning! Do not leave the unit unattended while in use.
Do not touch hot parts. The plates (4 & 5) will
become hot during use.
Place the appliance on a suitable surface.
Connect the plug to a power socket; the red power
indicator (2) will light up.
When the unit reaches the correct cooking temperature the
green temperature indicator (1) will light. This indicates that
the unit is at the correct temperature and is ready for use.
Preheat the plates as described above.
Open the appliance and place a slice of buttered bread
onto the lower plate (4), with the buttered side down.
Add the required filling and place another piece of
buttered bread on top, with the buttered side up.
If required repeat for a second sandwich.
Close the cooking plates by carefully lowering the upper
Warning! The contents of a toasted sandwich may be
After approximately 2 to 3 minutes, the sandwiches will
be ready. The time may vary depending on your taste,
the type of bread and the filling.
Cleaning and maintenance
Warning! Before cleaning and maintenance, switch the
appliance off, remove the plug from the socket and allow the
appliance to cool.
Warning! Do not immerse the appliance, the cord set or the
plug in water or any other liquid.
Wipe the exterior with a damp cloth.
Do not use scouring pads.
If necessary, use a mild detergent to remove spots. Do
not use any abrasive or solvent based cleaner.
Do not use metal implements on the non-stick surfaces.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.