Do you have a question about the DA-3600Pro2 and is the answer not in the manual?
Questions and answers
Patty Ising
May 6, 2025
Everything is hooked up correctly… still can’t get sound from the speakers
1 comments:
Mr. Anderson
May 18, 2025
If the VocoPro DA-3600Pro2 is hooked up correctly but there is no sound from the speakers, possible issues include:
1. Input Selector is set incorrectly – set it to the correct music source. 2. Music Master Volume is set to minimum – raise it to an appropriate level. 3. Effect Loop Bars are not inserted correctly or the connected device is malfunctioning – insert the loop bars correctly (L-OUT to L-IN and R-OUT to R-IN) or reconnect the device. 4. Speakers or speaker cables are not connected properly, are loose, or malfunctioning – check and tighten or replace them. 5. Source player is not working – replace the player and reset the DA-3600Pro's power supply.
Professional high power vocal amplifier (24 pages)
Summary of Contents for VocoPro DA-3600Pro2
Page 1
Excellent Features: • 100W + 100W Maximum Power Output at 8 Ohms • 135W + 135W Maximum Power Output at 4 Ohms • Pro Echo Circuitry for Enhanced Digital 3D-like Echo, Repeat and Delay Effects • 3 Microphone Inputs with +20dB Gain Pad, Volume, Balance, Echo and 3-Band EQ Controls on Each Channel •...
Safety Instructions CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user- serviceable parts inside. Only refer servicing to qualified service personnel. Explanation of Graphical Symbols The lightning flash & arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of danger.
Page 4
CAUTION: Read this before operating your unit The apparatus is not disconnected from the AC power source so long as it is connected to the wall outlet, even if the apparatus itself is turned off. To fully insure that the apparatus is indeed fully void if residual power, leave unit disconnected from the AC outlet for at least fifteen seconds.
Club VocoPro for Karaoke news and events, chat rooms, club directories and even a Service directory! We look forward to hearing you sound like a PRO with VocoPro, your ultimate choice in Karaoke entertainment. Please record the model number and serial number below, for easy reference, in case of loss or theft. These numbers are located on the rear panel of the unit.
Now it’s time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Before Getting Started: It is very important to read the following instructions prior to starting any installation procedures. Doing so will ensure a correct installation and may save you some time as well. Protect Against Power Surges • Connect all external components before you plug any of their power cords into the wall outlet. •...
The DA-3600 Pro's Features • 100W + 100W Maximum Power Output at 8 Ohms • 135W + 135W Maximum Power Output at 4 Ohms • Pro Echo Circuitry for Enhanced Digital 3D-like Echo, Repeat and Delay Effects • 3 Microphone Inputs with +20dB Gain Pad, Volume, Balance, Echo and 3-Band EQ Controls on Each Channel •...
Front Panel Descriptions MIC 1 VOL. INPUT NORMAL GAIN MIC 1 GAIN MIC 2 MIC 2 / MIC 3 VOL. CONTROLS INPUT MIC 2 MIC 3 NORMAL GAIN GAIN MIC 3 ECHO VOL. INPUT ECHO ECHO ECHO MUSIC VOL. INPUT SELECTOR 1.
Page 10
Front Panel Descriptions MIC 1 VOL. INPUT NORMAL GAIN MIC 1 GAIN MIC 2 MIC 2 / MIC 3 VOL. CONTROLS INPUT MIC 2 MIC 3 NORMAL GAIN GAIN MIC 3 ECHO VOL. INPUT ECHO ECHO ECHO MUSIC VOL. INPUT SELECTOR 8.
Page 11
Front Panel Descriptions MIC 1 VOL. INPUT NORMAL GAIN MIC 1 GAIN MIC 2 MIC 2 / MIC 3 VOL. CONTROLS INPUT MIC 2 MIC 3 NORMAL GAIN GAIN MIC 3 ECHO VOL. INPUT ECHO ECHO ECHO MUSIC VOL. INPUT SELECTOR 15.
Page 12
Front Panel Descriptions MIC 1 VOL. INPUT NORMAL GAIN MIC 1 GAIN MIC 2 MIC 2 / MIC 3 VOL. CONTROLS INPUT MIC 2 MIC 3 NORMAL GAIN GAIN MIC 3 ECHO VOL. INPUT ECHO ECHO ECHO MUSIC VOL. INPUT SELECTOR 21.
Rear Panel Descriptions 110-120V 220-240V voltage selector WWW.VOCOPRO.COM LA VERNE CALIFORNIA U.S.A. CAUTION: TO REDUCE THE RISK OF FIRE RELPACE WITH ONLY THE SAME AC IN TYPE AND RATING OF FUSE. ATTENTION: 110-120V UTILISER UN FUBIBLE DE 220-240V RECHANGE DE MEME TYPE.
Page 14
Rear Panel Descriptions 110-120V 220-240V voltage selector WWW.VOCOPRO.COM LA VERNE CALIFORNIA U.S.A. CAUTION: TO REDUCE THE RISK OF FIRE REPLACE WITH ONLY THE SAME AC IN TYPE AND RATING OF FUSE. ATTENTION: 110-120V UTILISER UN FUBIBLE DE 220-240V RECHANGE DE MEME TYPE.
AUDIO IN jacks labeled CDG on the DA-3600 Pro. RCA Cable DA-3600 Pro 110-120V 220-240V voltage selector WWW.VOCOPRO.COM LA VERNE CALIFORNIA U.S.A. CAUTION: TO REDUCE THE RISK OF FIRE REPLACE WITH ONLY THE SAME AC IN TYPE AND RATING OF FUSE.
Page 16
CH.A-B jacks on your external system device, and connect the RCA plugs from the other side to the LINE OUT jacks on the DA-3600 Pro. RCA Cable DA-3600 Pro 110-120V 220-240V voltage selector WWW.VOCOPRO.COM LA VERNE CALIFORNIA U.S.A. CAUTION: TO REDUCE THE RISK OF FIRE REPLACE WITH ONLY THE SAME AC IN TYPE AND RATING OF FUSE.
Page 17
VCR and connect the RF OUTPUT of the VCR to the TV ANTENNA INPUT jack. c) If there is no VCR present, you will need to use an RF Modulator. To obtain an RF Modulator, check with your VocoPro dealer. An RF Modulator can also be purchased from Radio Shack™. DA-3600 Pro...
Advanced Operations Switching A/V Channels Since the DA-3600 Pro has 2 A/V inputs, you can switch between them via the INPUT SELECTOR button. After your source players are connected to the DVD and CDG channels, press the INPUT SELECTOR to its inward position for the source player connected to the CDG channel and depress the INPUT SELECTOR to its outward position for player connected to the DVD channel.
Page 19
Advanced Operations Balancing a Microphone Channel When adjusting Mic levels, it is recommended to do so in this order: 1. First adjust the MIC VOLUME control to approximately 50%. (Shown on Fig. 1) 2. Then balance the LOW, MID and HIGH controls to approximately 40-60%. (Shown on Fig. 2) 3.
Troubleshooting PROBLEMS No sound coming from selected music source No graphic output from display devices when playing CDG’s High pitched squealing occurs when using the microphone No microphone output is present CAUSE Input Selector is set incorrectly Music Master Volume control is set to minimum The Effect Loop bars are either not inserted or inserted...
Recommended VocoPro Gear CDG-4000 PRO Professional CD/CD+ Graphic Player • Pro CD Player W/ CD + Graphics Decoder • Pitch Control To 12% (+) Or (-) • Scramble protection during pitch changes • Single Track Mode • Frame Search W/ Jog Dial •...
Recommended VocoPro Gear VP-600X 2 Space 600W Professional Power Amplifier • 300W + 300W RMS • 600W + 600W Max • THD: 0.05% • Frequency Response: 20HZ-20KHZ Signal to Noise • 1/4" or XLR Inputs • Input Ratio: Less than 100DB •...
Page 23
Recommended VocoPro Gear LCD-V5 5" TFT LCD Color Monitor • TFT LCD Color Monitor • Audio/Video Input • 3 Watts Stereo Speakers • Headphone Output With Volume Control • Color/Brightness Adjustment • Reversible Screen Control For Both Table Top Or Auto Roof Mounting •...
Recommended VocoPro Gear SV-420 Professional 8" 3 Way Vocal Speakers • 3 Way 8" Karaoke Vocal Speakers (Sold in Pair) • Design for Karaoke Studio or Singers Monitor • Power Rating: 180 Watts Peak / 90 Watts RMS • Metal Grill •...
Need help?
Do you have a question about the DA-3600Pro2 and is the answer not in the manual?
Questions and answers
Everything is hooked up correctly… still can’t get sound from the speakers
If the VocoPro DA-3600Pro2 is hooked up correctly but there is no sound from the speakers, possible issues include:
1. Input Selector is set incorrectly – set it to the correct music source.
2. Music Master Volume is set to minimum – raise it to an appropriate level.
3. Effect Loop Bars are not inserted correctly or the connected device is malfunctioning – insert the loop bars correctly (L-OUT to L-IN and R-OUT to R-IN) or reconnect the device.
4. Speakers or speaker cables are not connected properly, are loose, or malfunctioning – check and tighten or replace them.
5. Source player is not working – replace the player and reset the DA-3600Pro's power supply.
This answer is automatically generated