Honeywell ACS-2plus Installation Instructions Manual page 35

Table of Contents

Advertisement

Installation instructions / ACS-2 plus
Example:
The memory requirements for an ACS-2 plus controller is to be calculated based on the following
conditions:
Calculation:
Result:
A 1 MB memory extension is required.
If the calculated required memory space exceeds the max. free memory space, alternative calculations
using various lower values can be carried out. It is, for example, possible to reduce the number of bookings
to be stored. Is it possible to switch less relays? Do you really require all room/time zones?
Approximate value
The standard equipment of 1 MB (0.5 MB free) is sufficient, according to the above mentioned calculation
method, for approx. 1,500 cards and approx. 20,000 bookings.
The required memory space for both of zones and ID cards will be displayed when the maximum values
are entered in IQ NetEdit (refer to the IQ MultiAccess Installation Instructions, P32205-26-0G0-xx,
additional settings tab).
3
The new trademark corresponds with the previous effeff coding.
10,000 ESSER coded contactless cards
6-digit PIN code
20 room/time zones
Antipassback control
Control of 7 macros
100,000 bookings
5 timers for BRE
3
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

026547026548

Table of Contents