Page 1
4. NOMENCLATURE AND FUNCTIONS ... 4 Thank you for purchasing TOA's Battery Charger. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. OPERATING INSTRUCTIONS IR-200BC 5. CHARGING ... 5 6. TROUBLESHOOTING ... 7 7. SPECIFICATIONS ... 8...
1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety.
3 hours. 3. HANDLING PRECAUTIONS • Since the supplied power cord is designed for use specifically with the IR-200BC charger, do not use it with equipment other than the IR-200BC. • Use the IR-200BC in locations where an ambient temperature ranges from 0 to 40 ºC (32 to 104 ºF).
4. NOMENCLATURE AND FUNCTIONS 1. Power switch To turn on the power, set this switch to the [ ] position. To turn off the power, shift this switch back. 2. Mounting Adapter (factory-attached to the charger) Used when charging the IR-200M handheld infrared wireless microphone.
5. CHARGING CAUTION Notes • Use the charger in locations where the ambient temperature range is between 0 and 40 ºC (32 to 104 ºF). • Charge the IR-200BT battery before using it. • If an infrared wireless microphone containing an IR-200BT battery has been stored for a long period of time, it is recommended that the microphone be charged before use.
Page 6
Step 4. Turn off the power of the infrared wireless microphone to be charged, then insert the 2 IR-200BT rechargeable batteries into the microphone. For proper battery insertion, refer to the instruction manual enclosed with the infrared wireless microphone. Note Charging cannot be correctly performed if the infrared wireless microphone's power switch is set to the ON position.
6. TROUBLESHOOTING Symptom Power indicator does not • The AC adapter is not plugged into light even if the power switch is turned on. • AC adapter plug is not connected to Charging indicator (red) • The does not light even when infrared wireless microphone is inserted...
Using the mounting adapter allows one each of the IR-200M and IR-300M to be charged in combination. Height is 109.5 mm (4.31") when the mounting adapter is installed. Not supplied with the IR-200BC KR. For the usable power supply cord and AC adapter, contact your nearest TOA dealer.
Need help?
Do you have a question about the IR-200BC and is the answer not in the manual?
Questions and answers