Advertisement
HOVER INSTALLATION INSTRUCTIONS
WARNING: You must consult or hire a professional to ensure cabinet is installed
properly and safely. For safe mounting, it is imperative to use wall anchors
appropriate to your wall type. Mounting to wood studs is recommended for proper
installation. Below, we have listed recommended hardware for installation on drywall
or wood studs. Improper installation can result in serious injury.
The 48" unit, 60" unit and 72" unit each include a wall cleat (1).
48" Unit
Recommended hardware and materials
for proper installation:
• Stud finder
• Pencil
• Level
• Power drill
60" Unit
Recommended hardware and materials
for proper installation:
• Stud finder
• Pencil
• Level
• Power drill
72" Unit
Recommended hardware and materials
for proper installation:
• Stud finder
• Pencil
• Level
• Power drill
INSTALLATION INSTRUCTIONS
Keep these instructions for future use
• Metal drywall anchors (2)
• 2" screws (4) for use in drywall or
wood studs
• 3/4" wood screws (2) for attaching
cabinet to wall cleat
We recommend FOUR attachment points to the wall.
At least TWO of these points should be in wood studs.
• Metal drywall anchors (2)
• 2" screws (5) for use in drywall or
wood studs
• 3/4" wood screws (2) for attaching
cabinet to wall cleat
We recommend FIVE attachment points to the wall.
At least THREE of these points should be in wood studs.
• Metal drywall anchors (3)
• 2" screws (6) for use in drywall or
wood studs
• 3/4" wood screws (2) for attaching
cabinet to wall cleat
We recommend SIX attachment points to the wall.
At least THREE of these points should be in wood studs.
Advertisement
Table of Contents
Related Manuals for Room&Board HOVER
Summary of Contents for Room&Board HOVER
- Page 1 INSTALLATION INSTRUCTIONS Keep these instructions for future use HOVER INSTALLATION INSTRUCTIONS WARNING: You must consult or hire a professional to ensure cabinet is installed properly and safely. For safe mounting, it is imperative to use wall anchors appropriate to your wall type. Mounting to wood studs is recommended for proper installation.
- Page 2 Instructions: Locate the desired location of the cabinet on the wall and use a pencil to make a horizontal line on the wall. This line denotes where the top of the cabinet will be once it is installed, so use a level to ensure even placement. Use the stud finder to find the necessary number of studs in the wall, and use a pencil to mark these locations.
Need help?
Do you have a question about the HOVER and is the answer not in the manual?
Questions and answers