WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
Always use oven gloves to remove or put in accessories or
Before carrying out any maintenance, disconnect the
appliance from the power supply.
WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
Do not use the appliance before installing it in the built-in
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre
or similarly qualified persons to avoid an electrical hazard.
To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
The means for disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules.
Use only the food sensor (core temperature sensor)
recommended for this appliance.