Download  Print this page

AEG BSK999330T User Manual page 17

Hide thumbs

Advertisement

Put the test paper
into water for about
1 sec. Do not put
the test paper under
running water.
The colours of the test paper continue to change. Do not check water hardness later than 1
min after test.
You can change the water hardness level in the menu: Settings / Setup / Water hardness.
The table below shows water hardness range (dH) with the corresponding level of Calcium
deposit and the quality of water. When the water hardness level is 4, fill the water drawer with
bottled water.
Water hardness
Level
dH
1
0 - 7
2
8 - 14
3
15 - 21
4
22 - 28
Shake the test paper
to remove the excess
of water.
Test paper
BEFORE FIRST USE
After 1 min, check
water hardness with
the table below.
Calcium de‐
Calcium de‐
posit (mmol/l)
posit (mg/l)
0 - 1.3
1.4 - 2.5
2.6 - 3.8
3.9 - 5
Set the water hardness
level: Menu / Settings /
Setup / Water hard‐
ness.
Water classi‐
fication
0 - 50
soft
51 - 100
moderately
hard
101 - 150
hard
151 - 200
very hard
17/64

Advertisement

loading