Software Licences; Initial Preheating; How To Set: Water Hardness - AEG BSK999330T User Manual

BEFORE FIRST USE
Protocol
Max Power

5.4 Software licences

The oven software contains copyrighted software that is licensed under the BSD, fontconfig, FTL,
GPL-2.0, LGPL-2.0, LGPL-2.1, libJpeg, zLib/ libpng, MIT, OpenSSL / SSLEAY ISC, Apache 2.0
and others.
Check the full copy of the licence in: Settings / Service / Licence.
You can download the source code of the open source software by following the hyperlink present
on the product web page.
Look for the oven model and Wi-Fi Module Software version on http://aeg.opensoftwarereposito‐
ry.com inside "NIUX" folder.

5.5 Initial preheating

Preheat the empty oven before the first use.
Step 1 Remove all accessories and removable shelf supports from the oven.
Step 2
Set the maximum temperature for the function:
Let the oven operate for 1 h.
Step 3
Set the maximum temperature for the function:
Let the oven operate for 15 min.
The oven can emit an odour and smoke during preheating. Make sure that the room is ventila‐
ted.

5.6 How to set: Water hardness

When you connect the oven to the mains you have to set the water hardness level.
Use the test paper supplied with the steam set.
Step 1
16/64
IEEE 802.11b DSSS/802.11g/n OFDM
EIRP < 20 dBm (100 mW)
Step 2
.
.
Step 3 Step 4