Table of Contents
Advertisement
Serial I/O Port To
5
Device Cabling
PM16-DB and
CMX16-DB Port
Pinouts
Serial I/O Port to Device Cabling
The Serial I/O Expandable Subsystem supports a wide variety of
devices (both DCE and DTE), a range of cables from 4-wire RJ-11 to
10-wire RJ-45 and several different types of end connectors (DB-25,
DB-9, RJ-11 and RJ-45).
All Serial I/O ports provide a standard RS-232 interface with full
modem control signals.
To assist in wiring the I/O ports, Equinox sells a complete set of
cabling accessories. See www.equinox.com for more information.
The PM16-DB and CMX16-DB ports provide standard RS-232 DTE
signals on all DB-25 female connectors, one for each connected
device (see Figure 5-1).
Figure 5-1. PM16-DB and CMX16-DB Port Connector Orientation
5-1
Advertisement
Table of Contents
