Environmental Parameters; Maintenance - Schaudt LRM 1218 Operating Instructions Manual

Solar charge regulator
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
Calculation example
End-of-charge-
voltages
Suitable EBL ...
electroblocks and other
connection options
5.3
Operating temperature
Storage temperature
Humidity
Cleaning
8220216 BA / EN
Operating Instructions for Solar Charge Regulator LRM 1218
For example, five solar modules each rated at 55 Wp can be connected in
parallel:
Per solar module e.g.
Total nominal current
Battery type
Charging-
set
voltage
Supply mode
Fixed voltage 13.4 V
AGM2
14.7 V
Lead-gel/
14.4 V
AGM1
Lead-acid
14.4 V
The temperature correction of end-of-charge voltages is --20 mV per degree
of temperature increase (in relation to 25 C) or +20 mV per degree of tem-
perature reduction (voltage limits: U
limit at 14.9 V is in consideration of the maximum input voltage of the consu-
mers connected).
Schaudt electroblocks with SDTBUS (they have a separate input for
F
the solar currents of leisure and starter batteries, and a connector for
the SDTBUS)
Schaudt electroblocks with a separate connector for the solar currents
F
of leisure and starter batteries; possibly also a connection for current
display (relayed to the DT .../LT ... control panel connected to the EBL
...)
Schaudt electroblocks with a retrofit adapter for charging the starter
F
battery
Direct connection to leisure and starter batteries for external systems;
F
solar current display by LT 320 (available optionally) possible

Environmental parameters

-10 C to +50 C
-20 C to +70 C
Operation in dry environment only
CE
CE marked

Maintenance

6
The device requires no maintenance.
Clean the device with a soft, slightly damp cloth and mild detergent. Never
use spirit, thinners or similar substances. Do not allow liquids to enter the
device.
No part of this manual may be reproduced, translated or copied without ex-
E
press written permission.
U
= 22 V, U
offload
I
= 3.2 A
MPP
I
= 16 A
MPP
Charge reten-
tion voltage
13.7 V
13.8 V
13.4 V
13.4 V; U
min
Date: 27.02.2020
= 17.2 V
MPP
At reference
Time
temperature
phase
25 C
4 h
25 C
12 h
25 C
4 h
14.9 V; the top voltage
max
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents