Advertisement
4.0 CLEANING - CONTINUED
TIPS FOR CLEANING
Details for cleaning door seals, cavity and adjacent parts:
Exterior:
Wipe the enclosure with a dampened soft cloth
Door:
Using a dampened soft cloth, wipe clean the door and window
Wipe the door seals and adjacent parts to remove any spill or spatter
Wipe the control panel with a slightly dampened soft cloth
Interior walls:
Wipe clean the cavity with a dampened soft cloth
Wipe clean the waveguide cover to remove any food splashed
Turntable/ Rotation ring/ Rotation axis:
Wash with mild soap water
Rinse with clean water and allow drying thoroughly
5.0 PRODUCT INSTRUCTIONS
1) Door lock
Microwave oven door must be properly closed in order for it to operate
2) Viewing window
Allow user to see the cooking status
3) Rotating axis
The glass turntable sits on the axis; the motor underneath it drives the turntable to rotate
4) Rotating ring
The glass turntable sits on its wheels; it supports the turntable and helps it to balance when rotating
5)Turntable
The food sits on the turntable, its rotation during operation helps to cook food evenly
CAUTION
- Place the rotating ring first
- Fit the turntable onto the rotating axis and make sure that it is geared in properly
6) Control panel
See below in details (the control panel is subject to change without prior notice)
7) Waveguide cover
It is inside the microwave oven, next to the wall of control panel.
WARNING
Never remove the waveguide cover
8) Grill rack
Use to place the roasting food.
Figure 8
8
GB IE
©
2019 Focal Point Fires plc.
Advertisement
