Removing the Door
When it is necessary to move the appliance
through a narrow opening, removing the doors
is the recommended procedure.
• Disconnect the power cord, house fuse or
circuit breaker before installing or servicing the
appliance. Failure to follow these instructions
may result in death, fire or electric shock.
If your entrance door is too narrow for the
appliance to pass through, remove the
appliance doors and pass the appliance
[For both freezer and fridge]
Remove the screw of the hinge cover on
top of the appliance by rotating it
While pressing (1) hook of the link of the
electrical connectors, remove the link by
pulling it in both directions.
Remove the hinge lever by tapping the end
of it toward the outside edge of the cabinet.
• When removing the upper hinge, be sure to
support the door as it will fall forwards. It is
recommended that two or more people carry
out the door removal and refitting.
Lift the upper hinge fixed between the
appliance and the appliance door and then
Remove the freezer and fridge compartment
door by lifting it upward. At this time, the
door should be lifted enough for the steel
pipe to be completely pulled out.
Refitting the Door
Mount the doors in the reverse sequence of
their removal once the appliance has been
passed through all access doors.
Levelling the Appliance
The appliance has two front levelling legs.
Turn the levelling leg to the left to raise that
side of the appliance or to the right to lower it.