Safety Guide; General Information - Tempest Power Blower Direct-Drive Series Owner's Manual

SAFETY GUIDE

Failure to follow the operating, maintenance and lubrication
requirements set forth in this manual and the engine manufacturer's
owner's manual may result in serious personal injury or death
and/or damage to equipment or property.
The following WARNING statements indicate potentially
hazardous conditions for operators and equipment. Make certain
that anyone who works on or around the blower has read and fully
understands the safety precautions listed.
1. Carefully read this owner's manual before attempting to
operate, service or disassemble any part of your Tempest
Power Blower
.
TM
2. DO NOT operate the unit when mentally or physically
fatigued or impaired.
3. Stay away from rotating parts; avoid wearing loose jackets,
shirts, and ties. Keep hands and feet away from moving parts.
4. Keep all unauthorized personnel at a safe distance from the
blower.
Keep all guards in place. DO NOT make repairs while the
5.
unit is running. DO NOT operate if any guard or grille is not
in place.
6. Always wear eye protection. Loose debris can be picked up in
the air stream and flown in the air.
7. Hearing protection is required. Engine and air noise may
exceed safe dB levels.
8. Gasoline is extremely flammable and is explosive under
certain conditions. To prevent fire hazards, do not place
flammable objects close to the engine.
9. Do not overfill the fuel tank. After refueling, make sure the
tank cap is closed properly and secured. If any fuel is spilled,
make sure the area is dry before starting the engine.
10. Never operate gasoline-powered blowers in an enclosed or
confined area. Exhaust contains poisonous carbon monoxide
gas; exposure may cause loss of consciousness and may lead
to death.
11. The muffler becomes very hot during operation and remains
hot for some time after stopping the engine. Be careful not
to touch the muffler while it is hot. To avoid severe burns or
fire hazards, let the engine cool before transporting or storing
the unit.
12. It is the sole responsibility of the owner/operator to develop
procedures for proper use of the Tempest Power Blower
accordance with generally accepted ventilation techniques as
well as the organization's own operating procedures, before
placing the unit into service.

GENERAL INFORMATION

BLOWER IDENTIFICATION
Each Tempest Power Blower
number. The part number identifies the type of unit (size, drive,
etc.) while the serial number relates to information referencing the
date of manufacture. This information is useful should it become
necessary to contact the factory regarding your Power Blower
SERIAL NUMBER LOCATIONS
The serial number is typically located on the frame just right of the
engine mount (when viewed from behind).
Please write the Serial Number of your Tempest Power Blower
in the spaces below. This will aid us in identifying which model
you have when assisting you.
Model (Part No.)
Date
Serial No.
WARRANTY
Warranty information on your unit can be found on the back page
of this manual. For further information, please contact Tempest
Technology Corp.
in
TM
has a part number as well as a serial
TM
.
TM
TM
3