Vision Fitness E3200 Owner's Manual page 16

TROUBLESHOOTING
Our Bikes are designed to be reliable and easy to use. If, however, you
have a problem, these troubleshooting steps may reveal the cause.
PROBLEM: The console does not light up.
SOLUTION: Check to make sure the power switch located on the
backside of the console is turned on.
SOLUTION: Make sure the power adapter is plugged into the base of the Bike.
SOLUTION: Make sure the wire harness is plugged into the back of the
console.
PROBLEM: The Bike is making a
clicking noise.
SOLUTION: Using
the pedal
wrench supplied with your Bike,
remove both the left and right
pedals, apply grease to the
threaded portion and reassemble
the pedals onto the Bike. Make
sure the pedals are tight.
SOLUTION: Make sure the pedal straps or your shoe laces are not hitting
the side cover.
SOLUTION: Assure seat adjustment is tight (See page 8)
PROBLEM: The Bike makes a squeaking or creaking noise.
SOLUTION: Check and tighten all hardware.
12