Page 1
Large XLT Duct Kit Installation by Vinothèque and WhisperKOOL® “Protecting Your Investment in Fine Wines” 6-05-08...
Page 3
Duct Kit Parts List Large XLT Duct Kit 90° Register Boot Model DF-0C Duct Fan Boot-Unit Adapter Flange from Wells Technology, Inc Measurement Guidelines Thermostat Controller 0 inches 8” Flex Ducting 40 inches (not included)
Page 4
Step First: Remove the five screws which will hold the ducting unit in place One screw is located at the top-center A pair of screws are located at the top-right and the top-left Another pair of screws are located mid- right and mid-left...
Page 5
Second: Move the ducting unit in place and attach it into the unit. Line up the screw holes on the ducting unit with the screw holes on the WhisperKOOL® Screw the ducting unit onto the Whis- perKOOL® XLT starting with the top center screw...
Page 6
Step Third: Plug the unit in The fan will not instantly turn on. Instead, a heat sensor will detect when the unit begins to heat up which will trigger the fan to regu- late temperature. The customer will need to purchase 8” flex ducting, along with any hangers needed to run the ducting outside The warm air can be exhaust to several places...
Page 7
Using the Thermostat Controller The in-line fan will turn on and push warm exhaust air away from the WhisperKOOL® unit, preventing the unit from overheating. The in-line fan is capable of moving warm air through 25 feet of 8” flex duct- ing (not included).