Automatic Rinsing; Safety - Miele DGC 7440 X Operating And Installation Instructions

Settings

Automatic rinsing

Following a cooking programme with
steam, Appliance rinsing
the display after the steam oven has
been switched off.
This process flushes any remaining
food deposits out of the system.
You can activate or deactivate the
automatic rinsing process.

Safety

Sensor lock
The sensor lock prevents the cooking
programme being switched off by
mistake or settings being changed.
Apart from the  On/Off sensor
control, the activated sensor lock
prevents the sensor controls and fields
in the display from working for a few
seconds after a programme has been
started.
– On
The sensor lock is active. Touch the
OK sensor control for at least
6 seconds to deactivate the sensor
lock for a short period of time.
– Off
The sensor lock is deactivated. All
sensor controls react again to touch
as normal.
44
will appear on
System lock 
The system lock prevents the steam
oven being switched on by mistake.
The minute minder and the MobileStart
function can still be used when the
system lock is active.
The system lock will remain activated
even after a mains outage.
– On
The system lock has been activated.
Before you can use the steam oven,
touch the OK sensor control for at
least 6 seconds.
–
Off
The system lock is deactivated. You
can use the steam oven as normal.