Advertisement
Available languages
Available languages
NOTE: E nsure thesweeper isswitched offand thebattery i s
removed before a ttaching orremoving thesweeper tubes. The
inner t ube must b eassembled tothe housing before u se.
• TUBE ASSEMBLY:
Toattach t heinner t ube tothesweeper, line
upthetube with thesweeper housing asshown i nfigureD.
@
Push the tube into the sweeper housing until the lock button
engages the lock hole in the tube. Repeat this process for the
outer tube.
z_CAUTION:
Alwayswear
safety glasses. Wear a filter mask if the
operation is dusty. Use of gloves, long
pants and substantial footwear is
recommended.
Keep tong hair and loose
clothing away from openings and moving
parts. THIS SWEEPER IS FOR
HOUSEHOLD
USE ONLY.
• Hold the sweeper with one hand as
shown in figure E and sweep from side to
side with the nozzle several inches above
the ground. Slowly advance keeping the
accumulated pile of debris in front of you.
SWITCHING ON AND OFF (FIGURE F)
z_WARNING: use BOTH
HANDS TO GRIP THE PRODUCT FIRMLY
WHEN SWITCHING ON.
To switch the sweeper on, slide the on/off
switch forward.
To switch the sweeper off, slide the on/off
switch back.
z_CAUTION: Do NOT POINT
UNiT D_SCHARGE
AT
SELF OR BYSTANDERS.
CLEANING AND STORAGE
_' CAUTION: Do NOT POUR
OR SPRAY
WATER
ON THE UNIT.
Use only mild soap and a damp cloth to clean the unit. Never let
any liquid get inside the unit; never immerse any part of the unit
into a liquid.
Your sweeper should be stored in a dry place. Do not store the unit
on or adjacent to fertilizers or chemicals,
Such storage can cause
rapid corrosion of the metal parts,
Advertisement
