Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Auto ID Technology Manuals
  4. Touch terminals
  5. AT27
  6. Manual

Auto ID Technology AT27 Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Copyright Statement................................................................................01
Chapter 1
Check Package...................................................................02
Chapter 2
Hardware Introduction...........................................................03
Chapter 3
Start to Use........................................................................10
Chapter 4
FAQ and Warranty................................................................20
Copyright Statement
The information included in this document illustrates the current status of the product,
not a guarantee of meaning, including but not limited to any implied warranties or
merchantability or suitable for any particular purpose. And the content changes,
without further notice may occur at any time.
This file contains the exclusive proprietary information protected by copyright law, all
rights reserved. In addition to copyright laws allow some otherwise not been written
consent of the Company, no photocopying, reproduction, modification or translate
part or whole content.
Chapter 1 Check Package
Please check firstly "This Chinese Manual" include below items：
Content

Advertisement

loading
Need help?

Need help?

Do you have a question about the AT27 and is the answer not in the manual?

Questions and answers

Summary of Contents for Auto ID Technology AT27

  • Page 1 Content Copyright Statement………………….………………………………………………….01 Chapter 1 Check Package………………………………………………………….02 Chapter 2 Hardware Introduction………………………………….……………….03 Chapter 3 Start to Use………………………………………………………………10 Chapter 4 FAQ and Warranty…………………………….………..……………….20 Copyright Statement The information included in this document illustrates the current status of the product, not a guarantee of meaning, including but not limited to any implied warranties or merchantability or suitable for any particular purpose.
  • Page 2 Chapter 2 Hardware Introduction 2.01 Product Briefing Thank you for using our Handheld Terminal！ Mobile Intelligent Terminal is a compact complex Pocket PC using Windows CE operating system, integrated bar code reader, color touch screen, keyboard, unlimited communication capabilities. To provide users with the use of a standard Windows interface to the user manual will give you a better understanding of methods of operation and the use of mobile terminals.
  • Page 3 Samsung2416 400M FLASH 128M Memory Display 3.2inch 240*320 1D Code UE966(Laser) 2 D Code Non Support Scan Head Curve Head USB Transmission U Drive/ synchronize Bluetooth Non Support Network Connection WIFI Expandable TF Max. 4GB Speaker、Light、Vibration Notice Indicator 27-Key，Non Support Back-light Keypad Battery 3200mAh...
  • Page 4 Chinese Hand Writing； Chinese Input A/C Adapter，Charger，Lithium Battery，Handstrap，USB Cable ； Accessories Operation System WIN CE 5.0 2.04 Handheld Terminal Diagram 2.05 Switch on、Standby、Recover、Hot boot、Switch Off Switch On Press the top left corner of the screen for a long time the red button "Switch on Key", until after the screen prompt appears, you can release the button, which means that the terminal is open.
  • Page 5 Standby mode If the terminal is not a long time, but when you need to shut down, you can press the red button on the top left corner of the screen click the "power button", press to release, when display change to black, then Handheld change to standby mode. Recover If you need to recover standby, you can short press the power button on top of the screen's upper left corner of the "red"...
  • Page 6 2.06 Function Key Scan key：Scan 。 Cancel key（C）：When inserting barcode and word，Key C can act as retreat. Function key (F1, F2, F3, F4): Depending on the specific features of each interface may vary, please refer to platform instruction. Enter（OK）：press button to confirm option。...
  • Page 7 Insert TF card: TF card slot to open the metal cover of the fuselage, the TF card chip down, in contact with the chip to the bottom, then gently push up the lid, you can wear. 2) How to recharge battery The charger according to the interface connected to the charging port in the right direction, (the lowest end of the machine on the right side there is a hole that is charging interface) connect the power supply, the upper right corner (the terminal has...
  • Page 8 Chapter 3 Start to use product 3.01 Start to use Power on: Long press (3-5 sec) the upper left side of the black power button until the screen message appears after, then release the button, that means already opened. Check remaining battery Battery level indicator Normal：Above 40% Low：10%-40%...
  • Page 9 the value of the size of the external power supply, version, CPU release time and related setting. 4) Barcode setting, double click barcode setting and key-in password: password 87651234, precede setup. Double-click entry can be set arbitrarily enable (Allow: Set the appropriate code system can sweep) or restriction (Restrict: Setting prohibited code system, after restricted, you can not scan the appropriate bar code) can be set up according to their needs corresponding code system to scan to a different bar...
  • Page 10 5) USB function select, click "procedure" => "USB Change" run USB function select, user can choose 3 types of USB function, the user can choose according to need. if using "U Drive function" mode, the user can "click" left small circle next to the function, can finish selection successfully, "Software"...
  • Page 11 Remark: When scan head initialize failed, no optical scanning head scanning head hardware may be a problem, or if after the scan head initialization failure, red laser comes out when testing scan head, but cannot scan barcode, can be re-exit program again initialize the scan head, if the initialization is successful scanning head can be basically a normal scan.
  • Page 12 8) Keypad Testing, double click keypad to test, you can enter any key to detect the keys displayed on the screen, the key is correct, whether operation is normal. Reminder： Use the tip of your stylus touch screen mobile intelligent terminal, never use an ordinary writing pen, pencil or other sharp object on the mobile intelligent terminal screen.
  • Page 13 10) Time Setting, double click time setting to confirm。 3.03 WIFI setting 1) Wifi ON OFF setting , click on the bottom left of the terminal, procedure == "WIFILoader, open WIFI, press OK to confirm , the task bar at the bottom end of the red rectangle to see if WIFI open.
  • Page 14 2) Wifi connection is set to open, click on the bottom left of the terminal program "Settings - Network and Dial-up Connections" , double click in the icon IP setting, IP settings are divided into automatically obtain IP address or according to requirement to setup static IP (i.e.
  • Page 15 Chapter 4 FAQ and Warranty Because our equipment is based on windows operating system development, due to some problems in the use of Microsoft systems process will inevitably encounter some failures. And because the device is powered down, which may cause some software failure, so we gained some deal with common problems.