Use And Operation - Honeywell DCS2AE User Manual

USE & OPERATION
READ AND SAVE THESE INSTRUCTIONS
WARNING -- FAILURE TO FOLLOW THESE INSTRUCTIONS MAY DAMAGE AND/ OR IMPAIR ITS
OPERATION AND VOID THE WARRANTY. IN CASE THERE IS ANY INCONSISTENCY OR CONFLICT
BETWEEN THE ENGLISH VERSION AND ANY OTHER LANGUAGE VERSION OF THE CONTENT OF
THIS MATERIAL, THE ENGLISH VERSION SHALL PREVAIL.
Check the household voltage to ensure it matches the appliance's rating specifications.
DO NOT operate with a damaged cord or plug. If the supply cord is damaged, it must be replaced with a supply cord
which is as per manufacturers specifications, by the authorized service centre or its service agent or a similarly
qualified person in order to avoid a hazard.
DO NOT use an extension cord with this unit.
DO NOT run power cord under carpeting, or cover it with rugs or runners. Keep the cord away from areas where it may
be tripped over.
Always ensure the water tank is filled with water when operating in evaporative COOLING mode.
Always unplug the Air Cooler before refilling the water tank, cleaning, servicing or relocating the unit.
Never pull the cord. Remove it from the electrical outlet / socket by grasping and pulling on the plug-end of the cord.
This appliance has been manufactured for use in domestic environments and must not be used for other purposes.
When using the COOL setting, make sure the water tank is at Max Indicator Level. Operating the unit on the COOL
setting with an empty tank may result in damage to the water pump.
DO NOT attempt to repair or adjust any electrical or mechanical functions of the Air Cooler, as this may void the
warranty.
DO NOT cover the cooler's air inlet or outlet, as this may damage the motor.
DO NOT insert or allow objects to enter any ventilation or exhaust opening.
2
EN