MGE UPS Systems Comet EXtreme Series Installation And User Manual page 32

Comet EXtreme 4.5/6/9/12 kVA
Figure 3-2: Comet EXtreme 9 & 12 kVA (tower).
page 3—2
CAUTION
P
rior to initial start-up, check the UPS voltage
settings. If the protected equipment voltage is other
than 208 V/60 Hz, the UPS settings must be modified
using the "UPS Driver" software.
NOTE
Both AC and DC power are required to start
Comet EXtreme UPS.
configured for cold start, then AC and DC are
required for initial start-up only.
Operation
If Electronic module is