Chapter Iii - Operation; Scope; Controls And Indicators - MGE UPS Systems Comet EXtreme Series Installation And User Manual

3.0

Scope

This section describes operation of the Comet Extreme 4.5/6/9/12 kVA UPS.
3.1

Controls and indicators

Comet EXtreme 4.5/6/9/12 kVA UPS operating controls include basic controls and indicators (Figure 3-1),
concerning the overall operating status of the UPS and the special command and diagnostic display panel (Figure
3-2), which includes specific controls and a 2-digit display for the UPS fault numbers. These numbers provide UPS
diagnostics.
Figure 3-1: Comet EXtreme 4.5 kVA & 6 kVA front and rear panel (tower).
Note: Rack model controls and indicators are identical to tower.
CAUTION
Comet EXtreme products are factory configured at
208 VAC, 60 Hz input and output. Input and output
of the UPS must always be the same.
Operation
Installation and User Manual
O p e r a t i o n
page 3—1