Nuisance Call Block; Storing Unwanted Callers - Panasonic KX-TGB610E Operating Instructions Manual

Nuisance call block

You can press the MC/
situations to disconnect the current call and
add a phone number to the call block list:
– when an incoming call is being received
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
1
Press MC/ N under the situations shown
above. a M
R The call block number is stored in the
call block list, "Call Blocked" is
displayed, and then the call is
disconnected.
Note:
R If the call has no phone number, the call is
blocked but it is not stored in the call block
list.
R The call block feature is not available for
intercom calls or calls received by call
waiting.
R Blocked calls are logged in the caller list.

Storing unwanted callers

The unit can block calls by storing the desired
items in the call block list beforehand (Caller
ID subscribers only).
– "Single No.": The unit blocks calls from
specific phone numbers stored in the call
block list.
– "Range of No.": The unit blocks calls
that begin with a number stored in the call
block list, such as a toll-free phone number
prefix or certain area codes.
– "Withheld": The unit blocks calls that
have no phone number.
However, this option may not be available in
the following situations:
– If the caller dials from an area which does
not provide a Caller ID service.
– International calls.
Single phone numbers and ranges of numbers
can be stored in the call block list up to 50
items in total.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
N key in the following
N
Nuisance call block
Blocking unwanted callers:
When a call is received, the unit does not ring
while the caller is being identified.
If the caller's phone number matches an entry
in the call block list, the unit emits no sound to
the caller, and disconnects the call.
Storing a single phone number
Important:
R You must include the area code when
storing phone numbers in the call block list.
Adding call blocked numbers from
the caller list
1
MFN ( )
2
MbN: Select the desired entry to be
blocked.
3
M N a MbN: "Save BLKlist" a
M N 2 times a M
Adding call blocked numbers
manually
1
MC/ N
2
MbN: "Single No." a M
3
M N a MbN: "Add" a M
4
Enter the phone number (24 digits max.).
a M N a M
Storing a range of numbers
1
MC/ N
2
MbN: "Range of No." a M
3
M N a MbN: "Add" a M
4
Enter the desired number (2-8 digits). a
M N a M
Blocking incoming calls that
have no phone number
You can block calls when no phone number is
provided, such as private callers.
1
MC/ N
N
N
N
N
N
17
N
N