Page 2
The unit can also drive 8-ohm loudspeakers directly with its internal stereo amplifi- er (one watt per channel). If desired, the CR100A may be mounted in a standard 19-inch equipment rack by means of the optional RK78 Rack Panel Kit.
Controls and Functions 12 14 15 10 CR100A FRONT VIEW Operating Instructions 1. On/Off Switch and Volume Control - To turn the unit on, rotate the knob clockwise until an audible click is heard. Further clockwise rotation will increase the volume level.
Page 4
7. Eject Button - Press this button to eject the cassette tape. 8. Cassette Tape Door - Insert a cassette tape sideways with the tape side facing toward the right. 9. Digital Display - The display indicates station frequency and other functions. 10.
Page 5
Operations RADIO OPERATION 1. Turn the unit on by turning the Volume control knob clockwise. 2. Select either FM1, FM2, FM3, or AM mode. 3. Tune to a desired station, manually or automatically, with the Manual tuning, Seek or Preset buttons. 4.
Page 6
4 to 6 feet apart. Mount antenna discharge unit as closely as possible to where the lead-in enters the building structure. FM Line Antenna. The CR100A line cord functions as an internal FM Line Antenna for receiving FM broadcasts. For improved reception, particularly in weak signal areas, or for tuners mounted in consoles or racks, installation of the included ‘T’...
Page 7
FM Tuner Section Frequency Usable Sensitivity Frequency Response Signal/Noise Ratio Stereo Separation AM Tuner Section Frequency Range Sensitivity Cassette Deck Section Tape Speed Wow and Flutter Fast Winding Time Frequency Response Stereo Separation Signal/Noise Ratio Audio Section Power Output-Stereo System Output Operating Voltage Dimensions (WxHxD) Specifications...
Need help?
Do you have a question about the CR100A and is the answer not in the manual?
Questions and answers