Wps' Settings - ViewSonic WPG-360 User Manual

4-5-4 'WPS' Settings

In this menu, you can use WPS (Wi-Fi Protected Setup) to setup secure wireless
connections quickly and easily with WPS-compatible wireless clients.
Display and configures the WPS setting.
Item
Enable WPS
WPS Status
Self PinCode
Device Name
(SSID)
Authentication
Mode
Passphrase Key
Config Mode
Configure via Push
Button
Configure via
Client PinCode
ViewSonic WPG-360
Description
Check this box to enable WPS functionality; uncheck to disable
WPS.
Displays WPS configuration status: Configured (WPS ready), or
Unconfigured. If you set wireless security as described in previous
section already, WPS status will be 'Configured'.
Displays WPS self pin code. This code will be used when pin-style
WPS pairing mode is being used, and WPS wireless clients will
need to know this code.
Displays the device name of this WPG.
Displays current wireless authentication mode.
Here uses asterisk mark ( * ) to show WPA passphrase key.
Select WPS configuration mode: 'Registrar' and 'Enrollee'. Default
and recommend setting: Registrar.
Click "Start PBC" to handshake with other device with WPS function.
NOTE 1: When WPG is in 'Registrar mode', another wireless device
must set to 'Enrollee' mode; and vice versa.
NOTE 2: When no WPS connection is established within 2 minutes,
this mode will be turned off.
NOTE 3: You can also press 'WPS' button located on the front of
wireless presentation gateway to enter WPS mode, too.
Input the PIN code (up to 8 characters) of the WPS-enabled device
here, then click 'Start PIN' button, then WPG will establish
connection with it automatically.
34