Computer System Selection - ViewSonic PJL6223 User Manual

Computer Input
Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format
and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are
One of the following messages may appear when:
Auto
connected signal conforming to the provided
PC systems, Auto is displayed on the System
works to display proper images. If the image is
not projected properly, a manual adjustment is
There is no signal input from the computer.
-----
Check the connection between your computer
and the projector. (See "Troubleshooting" on
The preset system is manually adjusted in the
Mode 1
PC adjust Menu. The adjusted data can be
stored in Mode 1–10
PC Systems provided in this projector is chosen.
SVGA 1
The projector chooses a proper system provided
in the projector and displays it.
Selecting Computer System Manually
PC system can also be selected manually.
1
Menu. Use the Point
then press the Point
2
Use the Point
press the Point
Use the Point
3

Computer System Selection

buttons to select Input and
buttons to select System and then
buttons to select the desired system
PC System Menu
►
Computer 1
Computer 2
Video
System
The PC System Menu
Selected system is
displayed.
PC System Menu
can be selected.
RGB
RGB
►
XGA 1
Mode
(1–10) set in the
PC adjust Menu