Turning Off The Projector - ViewSonic PJL6223 User Manual

Basic Operation
1
on the remote control, and Power off? appears on the
screen.
2
projector. The POWER indicator lights red and the
cooling fans stop (default setting), and you can unplug
the AC power cord.
If L1
indicator starts to blink red and the cooling fans keep
indicator lights red and the cooling fans stop. You can
unplug the AC power cord even if the cooling fans are
still running.
YOU TURN THE PROJECTOR ON, WAIT AT
OFF.
DO NOT OPERATE THE PROJECTOR
Note:
will be turned on automatically by connecting the AC
to the temperature inside the projector.
cooled enough.
being cooled down and the projector cannot be turned
on. Wait until the POWER indicator stops blinking to turn
on the projector again.
indicator lights red.
L2
projector is turned on right after it turns off, it takes a
while to start projecting.

Turning Off the Projector

On, the projector
Power off?
Direct Off Function
You can disconnect the power cord from the
wall outlet or turn off the breaker even during
button.
Note:
When using the Direct Off function, you
cannot restart the projector immediately
after the power is disconnected. If the
the fans stop immediately. The lamp remains
high temperature and needs to be cooled.