Maintenance And Service - Bosch GRL2000-40H Operating/Safety Instructions Manual

Working with the Ceiling
Measurement Plate
(see figure A)
As an example, the ceiling measurement
plate 29 can be used for easy height
adjustment of drop ceilings. Fasten the
ceiling measurement plate with the magnetic
holder, e.g., to a beam.
T h e r e f l e c t i n g h a l f o f t h e c e i l i n g
measurement plate improves the visibility of
the laser beam in unfavorable conditions; the
laser beam can also be seen from the rear
side through the transparent half.
protective case.
Check the tool each time before using.
Keep the tool clean and dry at all times to
ensure proper and safe operation.
Do not immerse the tool into water or other
fluids.
Wipe off debris using a moist and soft
cloth. Do not use any cleaning agents or
solvents.
Regularly clean the surfaces at the exit
opening of the laser.
In case of visible damage or loose
components in the interior of the tool, the
safe function is no longer ensured.
If the tool should fail despite the care
taken in manufacturing and testing
2610055315 GRL2000-40 02-20.indd 23

Maintenance and Service

Store and transport the
tool only in the supplied
Working with the Measuring Rod
(Accessory) (see figure F)
voltage. Risk of being struck by lightning or
electrocution.
Keep at a safe distance from electrical
installations. It is essential to work in
this environment, first contact the safety
authorities responsible for the electrical
installations and follow their instructions.
For checking irregularities or projecting
gradients, it is recommended to use the
measuring rod 22 together with the laser
receiver.
procedures, repair should be carried out
by an authorized after-sales service center
for Bosch power tools.
In all correspondence and spare parts
orders, please always include the 10-digit
article number given on the type plate of
the tool.
In case of repairs, send in the tool packed in
its protective case 30.
ENVIRONMENT PROTECTION
Recycle raw materials & batteries
instead of disposing of waste. The
unit, accessories, packaging &
used batteries should be sorted for
environmentally friendly recycling in accordance
with the latest regulations.
-23-
Do not operate during
storms or near high
3/2/20 7:07 AM