Remote Control; Smartgrid - Miele WWG 660 Operating Instructions Manual

Settings

Remote control

The
Remote control
visible if the Miele@home
up and activated.
Once the Miele@mobile app has been
installed on your mobile device, you
can check the status of your washing
machine from anywhere and start it
remotely. You can also control it
remotely via the MobileStart
programme.
You can switch off the
setting if you do not want to operate the
washing machine with your mobile
device.
If Remote control is not switched on, the
app can cause the programme to be
cancelled.
Use the delay start function to set a
timeframe within which you want to
start the washing machine (see "Delay
start/SmartStart").
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.
Remote control is activated as
standard.
98
setting is only
setting is set
Remote control

SmartGrid

The setting is only visible if
SmartGrid
the Miele@home
activated.
This function can be used for starting
your washing machine automatically
at a time when your energy supplier's
energy costs are most economical.
Activating SmartGrid
start sensor control a new function. Use
the delay start control to set the
SmartGrid . The washing machine will
then start within the timeframe specified
by you when it receives a signal from
your energy supplier.
If a signal has not been received from
the energy supplier by the latest start
time set, the washing machine will start
automatically (see "Delay start").
SmartGrid is deactivated as standard.
setting is set up and
gives the Delay