Re-Fitting The Transit Bars - Miele WWG 660 Operating Instructions Manual

Installation

Risk of injury from sharp edges.
There is a risk of injury from reaching
into holes that are not covered.
Cover the holes for the transit bars
after they have been removed.
 Fit the stoppers onto the two holes.
78
 Secure the transit bars to the back of
the washing machine. Make sure that
the top catch is located above the
holder.

Risk of damage from incorrect
transport.
The washing machine may become
damaged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the machine is to be
moved (e.g. when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the
procedure.