Problem Solving Guide; The Programme Does Not Start - Miele WWG 660 Operating Instructions Manual

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Some of the messages in the display are more than one line long. Touch the  or
 sensor to read them in full.

The programme does not start

Problem
The control panel
remains dark.
The display prompts
you to enter a code.
The following appears
in the display:

 Service Door release
fault F35
Cause and remedy
There is no power to the machine.
 Check whether the mains plug is plugged in and
switched on.
 Check whether the fuse or circuit breaker has
tripped.
The washing machine has switched off automatically
to save energy.
 Switch the washing machine on again by turning
the programme selector.
Access via a code has been activated.
 Enter the code and confirm the entry. Deactivate
the code if you do not wish this message to
appear in the display the next time the machine is
switched on.
The door is not closed properly. The door lock could
not engage.
 Close the door again.
 Start the programme again.
If the fault message appears again, contact the
Miele Customer Service Department.

Problem solving guide

63