Appendix; Led Indicator Messages - ViewSonic PJD6241 User Manual

Appendix

LED Indicator Messages

LED Type
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
EN-44
Color Status
Blue Solid
Off Off
Off Off
Blue Solid
Off Off
Off Off
Blue Solid
Off Off
Off Off
Blue Flash
Off Off
Off Off
Blue Solid (Full brightness)
Red Solid
Red Flash
Blue Solid (Full brightness)
Off Off
Off Off
Blue Solid (Full brightness)
Off Solid
Off Solid
Blue Flash (Full
brightness)
Red Solid
Red Solid
Blue Solid (Full brightness)
Red Flash
Red Off
Off Off
Red Solid
Red Solid
Meaning
The projector is in standby
mode.
Powering up
Normal operation
Power-down
The projector system has some
problems with its fans, so the
projector cannot start up.
The lamp is in good condition
and is projecting at maximum
brightness.
The lamp has reached its end
of life and must be changed
soon. The lamp will continue to
operate until it fails . Change
the lamp. If the lamp is off, then
the ballast will become
malfunction.
The projector is shutting and
the fan motor is cooling the
lamp for shutdown. Do not
unplug the power cord or turn
the power off before the Lamp
LED changes to flashing. The
fan motor will turn off when the
lamp has cooled.
Temperature is too high. The
lamp will turn off. The fan motor
is cooling the lamp.
The lamp ignition failed. If
temperature is too high, the
fans will cool the lamp.