Setting The Presentation Timer - ViewSonic PJD5133 User Manual

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to
utilize this function:
1. Go to the Option > Presentation Timer menu and press
Enter on the remote control to display the Presentation Timer page.
2. Highlight Timer Period and decide the timer period by pressing
Important
If the timer is already on, the timer will restart whenever the Timer Period is
reset.
3. Press to highlight Display Timer and choose if you want the timer to show up
on the screen by pressing
Selection
Always
1 Min/2 Min/3 Min Displays the timer on screen in the last 1/2/3 minute(s).
Never
4. Press to highlight Timer Position and set the timer position by pressing
.
Top-Left Bottom-Left
5. Press to highlight Timer Counting Direction and select your desired
counting direction by pressing
Selection
Count Up
Count Down
6. To activate the presentation timer, press
on the projector or Enter on the remote control.
7. A confirmation message displays. Highlight Yes and press
Enter on the remote control to confirm.
/ .
Description
Displays the timer on screen throughout the presentation
time.
Hides the timer throughout the presentation time.
Top-Right
/
.
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
25
Bottom-Right
to highlight Start Counting and press
on the projector or
/ .
/
on the projector or