Connecting Video Source Devices - ViewSonic PJD5133 User Manual

Viewsonic projector user manual
Hide thumbs Also See for PJD5133:
Table of Contents

Advertisement

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one
of the following output sockets:
HDMI
Component Video
S-Video
Video (composite)
You need only connect the projector to a Video source device using just one of the
above connecting methods, however each provides a different level of video quality.
The method you choose will most likely depend upon the availability of matching
terminals on both the projector and the Video source device as described below:
Terminal name
HDMI
Component Video
S-Video
Video
Connecting an HDMI source device
Examine your Video source device to determine if it has a set of unused HDMI output
jacks available:
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to the
device.
To connect the projector to an HDMI source device:
1.
Take an HDMI cable and connect one end to the HDMI output jack of the HDMI
source device.
2.
Connect the other end of the HDMI cable to the HDMI jack on the projector.
Terminal appearance
HDMI
COMPUTER
S-VIDEO
VIDEO
17
Reference
"Connecting an HDMI
source device" on
page 17
"Connecting a
Component Video
source device" on
page 18
"Connecting an S-
Video source device"
on page 18
"Connecting a
composite Video
source device" on
page 19
Picture quality
Best
Better
Good
Normal

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pjd5233Pjd5523wVs14112Vs14114Vs13870

Table of Contents