Extending the functionality of the phone
Operating the base on a router/PABX
Operation with a router
When operating on the analogue connection of a router, any echoes occurring can be reduced
by enabling XES Mode (XES = eXtended Echo Suppression).
¤
Menu
Settings
(
= enabled)
If there are no problems with echoes, this function should be disabled.
Operation with a PABX
The following settings are only necessary when your PABX requires them (
user guide). Enter the digits slowly one after the other.
Setting the flash time
¤
Menu
0 = 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms;
7 = 800 ms
Enter digit
Changing pause after line seizure
You can set the length of the pause inserted between pressing the Talk key
the phone number.
¤
Menu
flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.
Changing pause after recall key
¤
Menu
flashes: 1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms
28
OK
Base
OK
OK
Enter digit
Additional
OK
The digit for the current flash time flashes:
The digit for the current pause length
OK
The digit for the current pause length
Enter digit
OK
XES Mode
OK
refer to the PABX
and sending