Advertisement
1.
Put in the spring as shown in pict. 4.
2.
Put in the reset level (white cog) into the
position shown in pict. 5.
3.
Put the new side cover on the cartridge and
tighten it with two screws.
The position of the reset lever is correct and your
cartridge reset, if the mark (small arrow on the side
cover) points to "1" on the reset lever.
Security references for the use of toner powder:
Please avoid the inhalation of toner powder. To prevent
inhalation and other associated risks, do not fill the toner
cartridges in your living space, but rather in a cellar or
outdoors. Work carefully and do not inhale the powder.
Be aware that dust particles may form an aerosol and
enter your eyes. Use rubber gloves to protect your hands.
If available, use a face mask.
©WWW.FARBTONER.COM
www.farbtoner.com
pict.5
www.farbtoner.com
pict.6
Advertisement
