Using The Monitor; Connecting To A Pc; Hdmi Connection; D-Sub Connection - LG 32MN500M Owner's Manual

USING THE MONITOR

•
Illustrations in this manual may differ from the actual product.
Press the joystick button, go to Settings
CAUTION
•
Do not press the screen for a prolonged time. This may cause image distortion.
•
Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC
screensaver if possible.
•
When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet.
• The monitor may flicker when turned on in an area where the temperature is low. This is normal.
•
Sometimes red, green, or blue spots may appear on the screen. This is normal.

Connecting to a PC

• This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.

HDMI Connection

Transmits digital video and audio signals from your PC to the monitor.
CAUTION
• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•
Recommended HDMI cable types
- High-Speed HDMI
® / TM cable
- High-Speed HDMI
/ cable with Ethernet
® TM
8
Input, and then select the input option.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied
D-sub 15 pin signal cable as shown in the following illustrations.
NOTE
• When using a D-Sub signal input cable connector for Macintosh
•
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB
VGA connector on the supplied cable to a 15 pin 2 row connector.