Whirlpool W11 CM145 Instructions For Use Manual page 31

Table of Contents

Advertisement

DISPLAYED MESSAGE
CLEANING UNDERWAY
PLEASE WAIT
MACHINE TOO HOT
POSSIBLE CAUSE
The appliance needs descaling.
The tubes inside the milk container (D)
must be cleaned.
The machine must be descaled.
The auto-start function is enabled.
Energy saving is enabled.
The appliance has detected impurities in
its internal circuits.
Using the stirrers continuously for long pe-
riods may cause the appliance to overheat
REMEDY
The descaling procedure described in section "Des-
cale" needs to be performed and/or the filter needs
replacing or removing as described in section "Water
softener filter".
Turn the froth adjustment dial (D1) to CLEAN (fig. 21).
The descaling procedure described in section "Des-
cale" needs to be performed.
To disable the function, proceed as described in sec-
tion "Auto-start
To disable energy saving, proceed as described in sec-
tion "Energy saving
Wait for the appliance to be ready for use again and
reselect the required beverage. Contact Customer
Services if the problem persists.
Wait for the appliance to cool down.
31
".
".
EN

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents