Procedure For Resetting The Camera - Motorola PEEKABOO User Manual

6. Procedure for Resetting the
Camera
Note: If your Camera is moved from one router (e.g. home)
to another (e.g. office) or you have Camera setup issues, then
the Camera must be reset. Please reset the Camera with the
following procedures:
1. Switch off the camera by unplugging the power supply from
the electrical socket.
2. Press and hold the PAIR button, then plug the powers supply
back into the electrical socket.
3. Release the PAIR button after approximately 8 seconds
and wait for the Camera Unit to complete an internal reset
procedure. The Red LED will begin to flash when the Camera
Unit is reset successfully.
4. You can add your Camera again by following the steps in
section 3.2.4 for Android devices or in section 3.3.4 for iOS
devices.
22

Procedure for Resetting the Camera