14
www.aeg.com
Step 6
The display shows:
Oven turns on automatically later on, works for the set Duration time and stops at the set
End Time.
At the set End Time the signal sounds for 2 min. The time setting flash in the display. The
oven turns off.
Step 7
Step 8
You can change the heating function after you set the function: Time Delay.Turn the
knobs to the off positions to stop the function: Time Delay.
7.6 How to set function:
Minute Minder
Minute minder can be both set when the
oven is turned on and off.
Step 1
Step 2
Step 3
Step 4
8. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
8.1 Inserting accessories
Use only suitable cookware and material.
Refer to "Hints and tips" chapter,
Turn the control knob to set the minutes for the function: End Time.
Press:
.
,
.
Press any button to stop the signal.
Turn the knobs to the off position.
- press repeatedly.
Turn the control knob to set the seconds and than the minutes.
- press to confirm.
Minute Minder - starts automatically after 5 sec.
After 90% of the set time the signal sounds.
When the set time ends the signal sounds for 2 min. 00:00,
any button to stop the signal.
, 00 - flash.
Microwave suitable cookware and
materials.
- flash. Press