ViewSonic DPG807 Quick Start Manual

Quick Start Guide

DPG807
Set Up Your Photo Frame
1
Plug AC adaptor into the photo
frame and plug it into a wall outlet.
View Images from Camera Memory Card
1
Turn on the photo frame.
Select Viewing Mode
1
Activate the touch frame buttons by touching the blue backlight. (Please note that the bluelight
timeout defaults to 20 seconds and can be adjusted through the SETUP menu.)
4
Select your desired media (i.e.,
photo, music, movie)
2
Turn the power switch on the back
of photo frame to "ON" position.
2
Insert your camera memory card
into the appropriate slot.
Touch Frame Buttons
5
Selecting "Photo" produces this
photo thumbnail display.
3
Connect the stand to the back of the frame
and adjust the angle.
3
Photo frame will automatically display memory card
photos in a slideshow. When no memory card is used,
the frame shows photos stored in internal memory.
2
Press the menu key on the touch
frame to open the main menu.
3
Highlight the desired icon by pressing the left/right arrow
buttons and press the select key on the touch pad.
OR
Selecting "Music" produces a list of
music stored on your photo frame.
OR
Selecting "Movie" produces a list of
movie/video stored on your photo frame.