Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pylon Technologies RV12100
Summary of Contents for Pylon Technologies RV12100
- Page 1 RV12100 User Manual Brief Version：1.0...
- Page 2 C on t en t 1 Introduction..........................1 1.1 Product features ---------------------------------------------------------------------------------- 1 1.2 Product appearance ---------------------------------------------------------------------------- 1 1.3 Scope and purpose of application ------------------------------------------------------- 2 2 Products Parameters......................2 2.1 Battery module technical parameters --------------------------------------------------- 2 2.2 Panel definition ----------------------------------------------------------------------------------- 3 2.3 System Wiring ------------------------------------------------------------------------------------- 3 3 Installation Environment......................6 4 Transportation and storage requirements.................6...
- Page 3 1 Product introduction 1.1 Product features The lithium iron phosphate battery adopts the modular series design, through the reliable BMS system and high-performance equalization technology, the whole system has the characteristics of flexible configuration and high reliability. It is widely used in home energy storage, power grid energy storage, photovoltaic energy storage, data room and other applications requiring high-voltage platform batteries.
- Page 4 1.3 Scope and purpose of application This battery is mainly used for RV battery (replacing traditional lead-acid battery), 12V battery application, electric car, yacht.etc 2 Product parameters 2.1Battery module technical parameters Table 4 -Technical parameters of battery module Item Value Nominal capacity 100 Ah Nominal voltage...
- Page 5 2.2 Panel definition Battery switch: Press the Power Button for “1S” and the battery will start up. Long press the Power Button “3S” to turn off the battery. Self-check lamp status：When the initial self-check is completed, all lights will be turn on for a while and then return to the normal display state.
- Page 6 25%-0% ● The protected state can be released upon Alarm Alarm According to Soc state ★ reaching the recovery condition Hardware ● Protect Protect damaged Indicator light description: Green light solid ●： Green light flashing (2S flashing) ★： Green light flashing (4S flashing) ★★：...
- Page 7 3、 Each set of the battery external cables should have the same wire diameter and length. This keeps the current flow of each battery consistent during operation. 4、 When 2~4 battery are connected in parallel, the charge-discharge current shall not exceed 0.5C of the Total current. 2.3.2 Series Connection Before wiring the battery model, Make sure all batteries are turned off .Follow the steps shown below for wiring.Then press any battery’...
- Page 8 3 Installation Environment Battery operating environment requirements are as follows: Working temperature：0℃ - 50℃ Humidity：5% - 95% Altitude：＜4000m The site environment ： Away from heat, no corrosive gas, no explosive gas, no damaging gas, no damaging insulation Conductive dust. 4 Transportation and storage requirements 4.1 Product transportation requirements Battery in the process of transportation should prevent violent vibration, impact or extrusion, to prevent the sun and rain, can use cars, trains, ships, aircraft and other...
Need help?
Do you have a question about the RV12100 and is the answer not in the manual?
Questions and answers