Hitachi 42PD9800TA Service Manual page 24

Hide thumbs Also See for 42PD9800TA:
Table of Contents

Advertisement

Amplitude Adjustment (576p)
Item
Preparation
(1)
Input 576p adjustment signal into AV1 terminal.
8 Color Bar
(Included 102 IRE
White signal)
[Note] Never adjust without use of the specified signal.
If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.
Amplitude Adjustment (576i)
Item
Preparation
(1)
Input 576i adjustment signal into AV1 terminal.
8 Color Bar
(Included 102 IRE
White signal)
[Note] Never adjust without use of the specified signal.
If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.
All manuals and user guides at all-guides.com
42PD9800TA (FW1)
(1)
(2)
(1)
(2)
24
Procedure
Receive 576p adjustment signal, and indicate
Service Adjustment Menu.(Main (1))
Select No.597 of Service Adjustment Menu.
Press [OK] key more than 2 seconds to start the
automatic adjustment.
The adjustment completes when the indication
[Auto Mode] at the bottom of the screen
disappears.
Procedure
Receive 576i adjustment signal, and indicate
Service Adjustment Menu.
Select No.597 of Service Adjustment Menu.
Press [OK] key more than 2 seconds to start the
automatic adjustment.
The adjustment completes when the indication
[Auto Mode] at the bottom of the screen
disappears.

Advertisement

Chapters

Table of Contents
loading

Table of Contents