Update And Recovery - Dell Vostro 5401 Setup And Specifications Manual

Table 34. Security(continued)
Option
Password Configuration
Password Bypass
Password Changes
Admin Setup Lockout
Master Password Lockout Allows you to disable master password support.

Update and Recovery

Table 35. Update and recovery
Option
UEFI Capsule Firmware
Updates
Description
• Enter the new password:
Press Enter once you enter the new password and again press Enter to confirm the new password.
Allows you to configure a password.
Upper Case Letter When enabled, this field reinforces password must contain at least one upper
capital letter.
Lower Case Letter When enabled, this field reinforces password must contain at least one lower
capital letter.
Digit When enabled, this field reinforces password must contain at least one-digit
number.
Special Character When enabled, this field reinforces password must contain at least one special
character.
NOTE: These options by default are disabled.
Minimum Defines the number of characters allowed for a password. Min = 4
Characters
Allows you to bypass the System password and the Internal hard drive password, when it is set, during a
system restart.
The options are:
• Disabled—This option is enabled by default.
• Reboot bypass
Allows you to change the system password and hard drive password without the need of administrator
password.
Enable Non-Admin Password Changes - By default, this option is disabled.
Allows the administrator to control how the user can access BIOS setup.
Enable Admin Setup Lockout - By default, this option is disabled.
NOTE:
• If the admin password is set and Enable Admin Setup Lockoutis enabled, you cannot
view the BIOS setup (using F2 or F12) without the admin password.
• If the admin password is set and Enable Admin Setup Lockoutis disabled, the BIOS
setup can be entered and items that are viewed in Locked mode.
Enable Master Password Lockout - By default, this option is disabled.
NOTE: The Hard Disk password has to be cleared before the settings can be changed.
Description
Allows you to update the system BIOS through UEFI capsule update packages.
Enable UEFI Capsule Firmware Updates - By default, this option is enabled.
System setup 31