Download Print this page

General Maintenance - Craftsman CMXETAX69434502 Instruction Manual

10"
Hide thumbs

Advertisement

Table of Contents
Fig. 40
2
4
1
1
1
1
2
2
2
2
3
3
3
3
3
To adjust bevel indicator (Fig. 41)
If the red line on the bevel indicator is not at zero when the
saw blade is at 90°, adjust the indicator by loosening the
screw and setting it at 0° on the bevel scale . Retighten
2
the screw .
2
Fig. 41
2
To check the tightness of the rip fence
locking handle (Fig. 42)
The locking handle on the rip fence should hold the rip
fence securely against the front and back rails. The handle
should not be di cult to push down and lock. To assure
proper fence lock adjustment:
Lock the rip fence in place.
Try moving the fence from side-to-side. If the fence
moves, tighten the lock nut 1/4 turn.
With the rip fence in the locked position, recheck rip
fence parallelism with the blade and adjust if necessary.
1
1
3
1
3
1
Fig. 42
MAINTENANCE
WARNING: When servicing, use only identical
replacement parts. Use of any other part may create a
hazard or cause product damage.
WARNING: Always wear eye protection with side
shields marked to comply with ANSI Z87.1 during
product operation. If operation is dusty, also wear a
dust mask.
WARNING: Before performing any maintenance,
make sure the tool is unplugged from the power
supply and switch is in the o position.
WARNING: Make sure the blade guard and
anti-kickback pawls are reinstalled immediately after
nishing any maintenance which requires them to be
removed. Failure to heed this instruction could result
in serious personal injury.

General maintenance

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: Do not at any time let brake uid,
gasoline, petroleum-based products, penetrating oils,
etc., come in contact with plastic parts. Chemicals can
damage, weaken, or destroy plastic which may result
in serious personal injury.
Periodically check all clamps, nuts, bolts, and screws for
tightness and condition. Make sure the table insert is in
good condition and in position.
Check the blade guard assembly.
To maintain the table surfaces, fence, and rails,
periodically apply paste wax to them and bu to
provide smooth functioning.
Protect the blade by cleaning out sawdust from
underneath the table and in the blade teeth. Use a resin
solvent on the blade teeth.
Clean plastic parts only with a soft damp cloth. DO NOT
use any aerosol or petroleum solvents.
ENGLISH
1
31

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Craftsman CMXETAX69434502