Advertisement
6
|
•
Apply skin prep (where provided) to coat skin and maximize
adherence.
•
Allow to dry thoroughly.
•
Position catheter stabilization device appropriate distance from
catheter insertion site to permit ease of insertion site care and
maintenance.
•
Secure catheter by using the primary suture hub.
•
Place suture hub wings over posts and press down (refer to
Figure 10). Snap retainer wings to closed position to secure
suture hub (refer to Figure 11).
Figure 10
Figure 11
•
Remove paper backing from one half of catheter stabilization
device pad and press onto dry, prepared skin. Repeat process for
other half.
•
Complete sterile insertion site dressing according to established
hospital/institutional protocol.
•
Document dressing application on patient’s chart.
•
Replace dressing per hospital/institutional protocol. Catheter
stabilization device should be replaced at least every 7 days to
ensure maximum adherence.
Refer to individual manufacturer’s instructions for more information
and specific detailed instructions.
Dressing:
A transparent dressing should be used in accordance with manufacturer’s
instructions for use.
•
Prepare site. Allow all preps to dry completely.
•
Peel liner from dressing to expose adhesive.
•
Adhere center of transparent window over insertion site, while
holding notched portion off the skin (refer to Figure 12).
Figure 12
•
Overlap softcloth tabs under catheter to form a tight seal around
catheter hub and lumens (refer to Figure 13).
Figure 13
•
Press dressing into place.
•
Slowly remove frame while smoothing down dressing edges.
Smooth dressing from center toward edges, use firm pressure to
enhance adhesion (refer to Figure 14).
Advertisement
